Solid Foam Fenders
MADE IN CALIFORNIA
BUOYS ~ FENDERS ~ DREDGE FLOATS ~ PILINGS ~ PORT SECURITY BARRIERS ~ DONUT FENDERS ~ HARDWARE ~ FENDERS FOR BUNKERING AND DOCK PROTECTION
OCEAN GUARD™ NETLESS FOAM FILLED FENDERS
The Ocean Guard™ Netless Foam-Filled Marine Fender!
The Ocean Guard™ Netless Foam-Filled Marine Fender is a unique and innovative fendering system, providing high-energy absorption with a relatively low reaction force. Its heat laminated foam core allows it to reliably and safely absorb large amounts of energy when it is compressed.
Click Here For Capacity Chart!
OCEAN CUSHION™ FOAM FILLED MARINE FENDERS WITH CHAIN & AIRCRAFT TIRE NETS
Unlike pneumatic fenders, Ocean Cushion™ Foam Filled Fenders are not inflated with air. The foam filled construction requires no air pressure or safety valves to maintain. These fenders will perform even when cut or punctured, when you need them the most! Fender chain net installation
LARGE STANDOFF
Ocean Cushion™ Fenders provide a standoff unmatched by many fendering systems. The chain and aircraft tire nets increase the diameter of the fender body achieving a standoff of up to 16 feet!
CLICK PHOTO AT RIGHT TO VIEW SIZE CHART
This unique fendering system provides a floating energy absorbing foam filled fender designed to simply slip over a stationary monopile and float at the fluctuating water line. Upon contact of a ship this fender will rotate freely and will self-adjust with the changing tides.
These monopile fenders provide a high rate of energy absorption with a relatively low reaction force. As with all the foam filled fenders this system produces a smoother, gentler berthing than hard rubber bucking fenders, while producing low reaction forces. Additional energy absorption is also supplied by the piling.
Freely rotating Ocean Guard™ Monopile Donut Fenders eliminate shear forces of a contacting vessel. The internal anti-friction UHMW bearing pads allows the fender to slide around and up and down the pile, and it allows the vessel to roll along the fender.
Ocean Guard™ Monopile Donut Fenders flexible energy absorbing foam core and its tough resilient elastomer skin give it the unique ability to conform to a vessels hull contours and extremities, such as rub rails. This is a safe fendering system that due to its solid foam core will allow the fender to fully function even if it becomes damaged, and the tough skin allows the fender to withstand the worlds harshest environmental conditions.
FENDER SIZES
Ocean Guard™ Monopile Donut Fenders come in standard sizes of 4.5′ diameter up to 9′ in diameter, with five energy absorbing levels.
APPLICATIONS
Bridge & Corner Protection ~ Dock Fendering in large tidal change areas or where vessels need “roll along” fenders ~ Ferry Applications ~ Lock Entrances ~ Areas where maneuverability is tough and vision is difficult ~ Areas where side to side current is strong
Small Standard Duty – with or without hawse pipe fittings. Designed for quick and convenient use.
Impact absorbing closed cell cross-linked polyethylene foam cores. Heat laminated into a one piece solid foam core. A thermal bond is produced between the layers of foam which is stronger than the foam itself. Buoys are able to absorb vessel impacts without damaging the buoy or the vessel!
Mooring Buoys & Buoy Release Hooks
