Custom Deck Mounted Capstans
– 15 Horsepower to 50 Horsepower
– Used by the USCG, USN, USACE, Commercial Shipyards
– Crane & Hoist Duty Motors (High Starting Torque)
– Weatherproof Motor & Magnetic Disc Brake 230/460 Volt
– Barrel Dimensions 18″, 24″ & 30″
– Available in Electric, Hydraulic & Explosion Proof
– Standard & Custom Control Packages
– Marine Paint Systems Available
Built to take severe operating conditions with a minimum of maintenance. These units can be single speed, two speed, or variable speed, with your choice of prime mover: electric, hydraulic, pneumatic, or manual. Electric powered capstans feature marine duty “Crane & Hoist” Design D motors for smooth starting under load and 300 percent starting torque. Capstan options include special marine coating and explosion proofing for hazardous areas.
– Double Taper Roller Bearings for Axial and Radial Load Control
– Spring Loaded Double Lip Seals
– High Strength Ductile Iron Gear Box
– Marine Sealed Motor
– Positively Lubricated, Oil Immersed Gear Set with Reservoir and Sump
– Crane and Hoist Duty (High Starting Torque) Motors
– Precision Helical / Worm Gear Reduction Sets
– Heat Treated / High Alloy Steel Shafting
Options:
– 100% Magnetic Disc Brake
– Pneumatic, Hydraulic, Explosion Proof Motors
– Control Packages
– Special Barrels
Thru–the–deck mounted, watertight, bronze–bushed cast – 100,000 lb static line pull.
Single or multi–speed, driven through a spur gear reduced differential speed reducer.
Motor / brake and differential speed reducer are suspended from the base forming a capsule drive unit.
Speed reducer operates in a continuous oil bath and all bronze bushings have pressure grease fittings.
Options:
Pneumatic, Hydraulic, Explosion Proof Motors
Control Packages
Special Barrels
DOCKS AND HARBORS – INDUSTRIAL – MANY USES
LINE PULL TO 5000 LBS
FOR QUOTES PLEASE SEND SPEED NEEDED, VERTICAL OR HORIZONTAL, TYPE OF POWER SUPPLY, SHIP OR SHORE BASED, AND LINE PULL REQUIRED
WE OFFER A VARIETY OF CAPSTANS, BOTH FREESTANDING AND AS AN INTEGRAL PART OF ANOTHER UNIT. STANDARD MODELS WILL MEET THE NEEDS OF ALMOST ANY APPLICATION, BUT CUSTOM FABRICATION IS ALSO AVAILABLE TO ACCOMMODATE SPECIFIC REQUIREMENTS. ALL MODELS ARE AVAILABLE WITH EITHER ONE OR TWO-WAY DRIVES, AND WITH A VARIETY OF CAPSTAN HEAD SIZES AND STYLES TO MATCH YOUR SPECIFICATIONS.
| Model | HP | LINE SPEED (fpm) | LINE PULL (lbs) | WEIGHT (lbs) | HEIGHT (inches) | WIDTH (inches) | DEPTH (inches) |
|---|---|---|---|---|---|---|---|
| FSC-5 | 5 | 75 | 1,700 | 900 | 44 | 22-1/2 | 30 |
| FSC-7.5 | 7.5 | 75 | 2,600 | 950 | 44 | 22-1/2 | 32 |
| FSC-10 | 10 | 75 | 3,000 | 1,050 | 44 | 22-1/2 | 32 |
| FSC-15 | 15 | 75 | 5,000 | 2,300 | 44 | 28 | 38 |
| Model | HP | LINE SPEED (fpm) | LINE PULL (lbs) | WEIGHT(lbs) | HEIGHT (inches) | WIDTH (inches) | DEPTH (inches) |
|---|---|---|---|---|---|---|---|
| LSC-5 | 5 | 75 | 1,700 | 800 | 26 | 22-1/2 | 30 |
| LSC-7.5 | 7.5 | 75 | 2,600 | 850 | 26 | 22-1/2 | 32 |
| LSC-10 | 10 | 75 | 3,000 | 950 | 26 | 22-1/2 | 32 |
| LSC-15 | 15 | 75 | 5,000 | 2,200 | 32 | 28 | 38 |
